Dry Carpet Cleaning Method is Often Used for Commercial Carpet Cleaning

Carpet cleaning extends a carpet’s life and creates a healthy office environment. The dry procedure of carpet cleaning is an effective and fast way to clean carpets. It involves the minimal usage of water. It is a method through which specialized machines are used with chemical technologies which permits ‘very low moisture cleaning. Dry carpet cleaning results in carpet beautification and removal of dirt, grit, stains, allergens and sand. This method of cleaning is used widely for commercial carpet cleaning purposes. 

There are many people who say that a quality vacuum can eliminate eighty to ninety percent dirt in the carpet as it is the most effective method of carpet cleaning. But what about the dirt that’s left behind by vacuuming? Material, which is left behind often contains grease, oil or moisture, which binds dirt to carpet. It is thus the dry carpet cleaning method that’s most effective. 

First step of dry carpet cleaning is to remove as much as material from the carpet using powered vacuum. Stains on carpet are spot cleaned and dried. Once vacuuming and stain treating, the floor material is then covered with powdered cleaner. Powder is either pre-moistened or lightly sprayed with cleaning solution or water after the application. Its machine brushed into carpet and allowed for setting. As powder rests, it gets to absorb and removes greasy or oily material from carpet fibers. After a certain time, powder gets removed from carpeting using the high-powdered vacuum. 

Moreover, as dry process of carpet cleaning uses very less water, the commercial carpets can dry faster and be usable within two hours. The method doesn’t even saturate the carpet like steam cleaning or hot water cleaning. The flooring materials can almost be used instantly after the cleaning process is over.

If you are looking for such commercial carpet cleaning services, hire skilled experts of Pharo Cleaning Services. 

Toilet Cleaning Tips for an Office

Nothing is bad then a smelly washroom in an office. It will have bad effects not only on your eyes and nose, but also on your health as well. Numerous germs and viruses grow up there and infect half of the office. Remember unhealthy stuffs can cut down the productivity of the company. Thus a dirty toilet needs to be cleaned properly to maintain the health of the company as well.

 Here are some basic steps of cleaning a toilet:

Sink:

It has got a counter around it. Most of the time it remains splashy as everyone washes their hands and faces all the time. This moisture helps to grow fungus and algae if not cleaned properly. Try to keep the counter dry as much as possible.

Mirror:

This is a highly neglected part in a washroom. Corner of the mirrors needs to be cleaned properly. Numerous bacteria can grow at that part.

Tiles:

It can be cleaned with a solution of water and vinegar. Proper cleaning of the titles eliminates the chances of growing insects and bacteria on them. A toilet remains moist most of the time, thus proper ventilation has to be done in a toilet.

Floor:

Floor cleaning of a toilet is most important. Most of the toilets have hard flooring. To clean the floor you can use modern steam cleaning mops or disposable mops that reduces the chances of infections. Also a periodic cleaning of hard toilet floor needs to be done by the professionals. To do this you can hire a hard floor cleaning services in NSW for better heath safety.

Usage of sanitizers:

Good sanitizers can make a washroom healthy. It is preferred not to use commercial sanitizers in office toilets. It has got pungent smell that can create a negative effect on the health of the staffs. Also keep hand sanitizers near to the sink to minimize the chances of spreading germs.

4 Mistakes That Can Be Easily Avoided For Carpet Cleaning

Neat and tidy carpets give a clean appearance to a house. But cleaning them can be difficult if wrong tools or wrong methods are used. Here you can find some basic mistakes that people make while they take an attempt to clean their carpets.

Buying the wrong equipment:

The most common mistake that people make is that, they buy wrong equipment for doing their carpet cleaning jobs. If you are having carpets laid all over your 2 storied building having 7 rooms, then a small hand held tool will not perform the desired result. For that purpose you probably will need bigger equipment. Small cleaning equipment has less motor capacity thus it cannot suck dusts from the deep pores of the carpets.

Mishandling the cleaning material:

Some people do make mistakes while using the carpet cleaning solution. It is always advisable to follow the manufacture guidelines while performing the cleaning. People usually make the mistakes of using a kind of cleaning solvent on their carpets, which they are not supposed to use. There are different cleaning solvents for different materials. Misusing of the cleaning solvent can actually causes harm to the carpet fiber as well.

Excess saturation:

While doing carpet cleaning people over saturate their carpets. They wipe carpet too much and that makes it soggy and heavy too. Try to use solvents which get easily evaporated without making the carpet drenched with cleaning solution. Excess saturation is responsible for growing fungus on the carpet.

Storing the equipment without cleaning it:

Many people do this mistake of not cleaning the equipment after using it. Sometimes this causes stingy smell. You may clean that equipment just before using it but remember this will leave marks on the carpets. If you have light color carpets then it is very dreadful.

To remove all these constrains and confusion you can hire a commercial carpet cleaning services and get everything done for you. By hiring a pro you will not only save your time but also your energy from doing this herculean task.